Fix Xiaomi Bootloop All Mi Devices Step Fix Stuck On Boot, Start Screen
This method is for all Mi devices In case your mobile device has got a boot after it shines with the firmware, or when removing the frank lock, then you fix this problem by following our few simple and authentic steps, only You must flash your mobile device one more time to fix any boot loop. Xiaomi mobile device using Mi Official Flash Tool, but make sure that the
Step by Step Fix Xiaomi is from Bootloop
Step Xiaomi MiFlash 2014 [DOWNLOAD]
Step Xiaomi Firmware [DOWNLOAD]
-Make sure you are downloading correct firmware according to your mobile device model.
After downloading Flash Tools and Firmware, remove both downloaded files now. Step Install the “MiFlash_2014” flashing mobile device in your PC. Step Open “MiFlash 2014”, and click on “browse” to see the firmware path (see below the screenshot ).
Install Xiaomi Mi Flash tool
- Select images folder
Flash Mi Xioami device
Now just give the “IMAGE” folder file path from your downloaded firmware (see below the screenshot ).
Now just give the “IMAGE” folder file path with your downloaded firmware (see below the screenshot ).
Select Flash all with downloaded firmware.
–Now click on “Browse” to give the Flash_all.bat file path. Find the file file of “Flash_All.bat” with downloaded firmware.
Put Device into Fastboot Mode & Connect to PC: -Just switch off Xiaomi Mi device. -Press & hold both (Volume Down + Power key) together until you see “Fastboot” screen.
Now you are ready to fix Xiaomi boot loop issue.
-After that release keys & Connect mobile device to the computer via micro USB cable.
-Now click on “Refresh” button from Mi Flash Tool. -After that, you will see your mobile device in your Xiaomi Flash tool same as shown in below screenshot.
-That means, your mobile device has successfully been detected by Xiaomi Flash too, and its ready to be flashed.
Note: If you don’t see anything in Xiaomi Flash tool, disconnect device, and reconnect it, try this multiple times and also change USB port, so that your computer and flash tool both detect your Xioami Device.
-Now click on “START” button to Fix Xiaomi Bootloop (See below screenshot ).
-Wait few minutes until the flashing process.
-Once the flashing process, you will see “The Operation Completed Successfully”.
-Congratulations, now you are done to Fix Xiaomi Bootloop. Thanks for visiting us, In case you’ve any question regarding this method, you can ask us in below comment area.